P-300 label applicator

Maximum roll diameter – 300 mm
Maximum label width – 125 mm
Maximum roll weight – 6 kg


“P-300” Reel-to-Reel Inkjet Label PrinterThe P-300 Reel-to-Reel Inkjet Label Printer is a combination of the well-known PM-300 Printer Mechanism and a standard inkjet print head. The print heads use the reliable HP TIJ 2.5 technology. Many ink cartridges, solvent or water based, are now available on the market allowing to print on many different materials.

The system is capable of printing a roll of labels of 30cm diameter, in less than 5 minutes with a resolution of 300×150 DPI. This, with a negligible cost of the consumable (ink).It makes the P-300 the ideal machine for adding variable data to pre-printed labels, at low cost and high speed, on the front or on the back of the web. The print files are generated on a standard computer using the supplied software and are transferred to the controller via an USB key. The p-300 can print labels with variable barcodes and messages of maximum 12.7mm height.

The extremely low-cost of the consumable, makes the machine very economical and ecological.


  • Text, graphics, barcodes, variable counter and dates.
  • Fully UNICODE compatible layout software.
  • Counter and dates with digits in roman, arab, farsi or user defined characters.
  • Low ink alarm with user-definable level.
  • Print height 12,7mm (1/2″)
  • User-definable resolution: 300×300 DPI, 300×150 DPI, 150×150 DPI, 150×75 DPI and 75×75 DPI. Aspecial model for 600×300 DPI is available upon request.
  • Separation between design and operation. Nothing in the layout can be destroyed by the operator.
  • Spit function to keep fast drying inks open.





  • Maximum roll diameter: 300mm.
  • Maximum label width: 125mm.
  • Maximum roll weight: 6Kg.
  • Maximum speed:
    • P-300-LS: 150cm/sec. The low-speed is recommended if you are only printing in high resolution.
    • P-300-HS: 235cm/sec.
  • Rewind “out” or “in”.
  • Standard unwind and rewind core holders 76mm (other diameters optional).
  • Power: 220V – 50Hz AC Input (115V optional).
  • With the proper ink and paper, the P-300 can also print on the backing paper.

* Maximum speeds are specified with a 76mm take-up roll diameter.
E.g.: With the PM-300-HS 4.5 min. for a roll of 2 8cm diameter with a 76 mm core at full speed. Average speed: 150 cm/sec.


Additional information



Model Brochure

Download product brochure